CAREPRO Wash Maintenance Guide For CARPRO Ceramic Coating

Step 1: Gather Your Supplies

Before you begin, make sure you have the following supplies ready:

• CARPRO Reset – pH-neutral car shampoo
• Two buckets with grit guards
• Microfiber wash mitt or sponge
• Hose or pressure washer
• CARPRO Reload – Maintenance spray
• Microfiber towels
• CARPRO ECH2O – Quick detailer & waterless wash

Step 2: Pre-Wash Inspection

1. Park your car in a shaded area to prevent the product from drying too quickly.
2. Inspect your car’s ceramic coating for any visible contaminants, such as bird droppings, bugs, or tree sap.

Step 3: Rinse the Car

1. Rinse the car thoroughly with a hose or pressure washer to remove loose dirt and debris.
2. This step will also help soften and loosen any contaminants on the surface.

Step 4: Washing with CARPRO Reset

1. Fill one bucket with water and add CARPRO Reset as per the recommended dilution.
2. Fill the other bucket with plain water.
3. Using the two-bucket wash method, dip your wash mitt or sponge into the soapy solution, then wash one section of the car at a time.
4. Rinse your mitt in the plain water bucket frequently to remove dirt and grit.
5. Gently wash the car’s surface, starting from the top and working your way down.
6. Be extra cautious not to use excessive force or pressure while washing, as ceramic coatings are sensitive to abrasion.

Related: Everything You Need To Know About Ceramic Coating

Step 5: Rinse Thoroughly

1. After washing the entire car, rinse it thoroughly to remove all soap residue.

Step 6: Drying

1. Use a clean, soft microfiber drying towel to gently dry your car. Pat the surface rather than dragging the towel to prevent swirl marks.

Step 7: Apply CARPRO Reload

1. Once the car is dry, spray CARPRO Reload directly onto the surface.
2. Spread the product evenly with a clean microfiber towel.
3. Buff off any remaining residue for a glossy finish.

Step 8: Final Touch with CARPRO ECH2O

1. For quick touch-ups or to maintain the shine between washes, use CARPRO ECH2O.
2. Spray ECH2O on the surface and gently wipe it with a microfiber towel.

Step 9: Regular Maintenance

• For long-term ceramic coating protection, it’s essential to apply CARPRO Reload periodically (every few months, or as recommended for your specific ceramic coating).
• Avoid using harsh chemicals, abrasive pads, or automatic car washes that may damage the coating.
• Always follow CARPRO’s specific product instructions and safety guidelines for optimal results and to protect your ceramic-coated vehicle.

By following this maintenance guide and using CARPRO products, your ceramic-coated vehicle will maintain its shine and protection for an extended period.